StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...
Free

Traffic Light Controller Circuit - Coursework Example

Summary
The paper “Traffic Light Controller Circuit” provides the logic circuit design to allow the functionality to execute. It includes presenting the logic components and the relationship that exists between the inputs and the outputs. It also selects the VHDL code to accommodate the traffic light controller design…
Download full paper File format: .doc, available for editing
GRAB THE BEST PAPER95.5% of users find it useful

Extract of sample "Traffic Light Controller Circuit"

Traffic Light Controller Circuit Name: Course: Instructor: Institution: Date of Submission: Introduction The traffic light controller exists as the devices that prevent control traffic flow through traffic intersections through timing the red, yellow and green lights. The traffic lights controller are based on timing the cyclic timing of the lights. The cycle of the traffic lights repeats itself unlimited. The lights use the Tr, Ty and Tg values where the Tr is the Red Value, Ty for yellow and Tg for Green. Thus, the project will provide the logic circuit design to allow the functionality to execute. It includes presenting the logic components and the relationship that exists between the inputs and the outputs. The paper will also select the VHDL code to accommodate the traffic light controller design for the figure below. It will include the code to execute the operation of controlling the outputs and inputs to specify the operation input and output pins to produce the correct output to drive three LEDs bestowing to the input values. Methodology: Logic Design Figure 2: Logic Circuit Design Network The light circuit of traffic is used for controlling traffic (Langholz, et al., 1998). The logic design network normally has three inputs and two outputs. The inputs include count, input 1 and two while the outputs include output 1 and 0. The functions implemented by F in the design include count 0 where O1 – O0 develops to 11-10. On the other hand, count = 1 equals to (11-10) is 01 where O1-O0 develops into 10. However, when 11-10 is implemented as 11 and count=1 where the output value will not overflow as it wraps around 00 (Ward & Hatlead, 1990). Thus, the logic design of the circuits should be as follows: Full-Adder Logic Design Diagram Count 11 10 O1 O0 0 0 0 0 0 0 0 1 0 1 0 1 0 1 0 0 1 1 1 1 1 0 0 0 1 1 1 1 1 0 1 1 0 1 1 1 1 1 0 0 The logic circuits designs include adders, comparators, decoders, multiplexers and encoders among others (6ch, n.d.). As presented in the diagram above, it adds the input bits and the input carry. The output carry is 1 when the inputs to the gate are 1s. The gate circuits logic designs were constructed through components such as resistors, diodes, and transistors. The circuit design at the gate level leads to the development of the physical circuit. The logic gates lead to the construction of a single integrated circuit. The 1s and 0s used in the logic design by implementing the simple Boolean functions. The development of combinational logic uses building blocks that lead to the logic design of the circuit (Ward & Hatlead, 1990). The combinational values of the inputs and outputs are used in developing the integrated circuits. The multiplexer device is used for input signals while presenting the signal to an output terminal. The Boolean variables are then used in the implementation of the mechanical motion that selects different inputs in the traffic controller device. The Boolean function is used in building the electronic analog switch (Ward & Hatlead, 1990, 106). The traffic controller needs more than one multiplexer input to choose more than one input. VHDL CODE VHDL stipulates the Very-High-speed integrated circuit Hardware Language description. The Defense Department developed it, and the language follows a formal syntax language. The VHDL mainly has three sections, which include the library declaration, entity, and architecture (Pedroni, 2005). The library declaration section deals with providing the available listed libraries a code that is already written by others but can be used in the circuitry. For instance, for the IEEE library, the following code can be used: (ieee.std_logic_1164.all;) the brackets are not necessary The code is used in the library where every unit of the code is a necessity and not optional (Pedroni, 2005). The semicolons, for instance, are used to stipulate the end of the code. On the other hand, the entity section presents the name of the design including all outputs and inputs to be used in the integrated circuit. The entity section’s performance uses input and output bits. The code in the entity section is provided in the following manner. Input_1_input_2_input_n:in_bit; Output_1_output_2_output_n:out_bit; entity_name; Entity names begin with letters and can consist of underscore characters and numbers as well. Circuitry_integrated is a valid name and entity code that can be used in an effective VHDL code. The architecture section presents the manner in which the entity named operates its functions (Pedroni, 2005). That is; it presents how the output function is attained from the input section. The code of the arch name is presented in a manner of arch_name of entity_name. The two define the behavior of the integrated circuit behavior in this case. Arch_name is the end of the code with a semicolon in the end. The logic design of the circuit as given above follows a function presented as the following: F (Tr, Ty, Tg) = TrTy + Tr’ TyTg’ + TyTg Thus, the library declaration for the circuitry is library IEEE. Thus, the VHDL code is ieee.std_circutry_1163.all; the code for the entity section is as follows: Library 1_vhdl, which is also the port. The input bits are a, b, and c. In the code, they are represented as Tr, Ty, Tg; The in-bit is then given as and ends with the semicolon. The output port then follows, which is represented by F in the logic design function. That is; f: out-bit; the end of the code is library 1_vhdl The entity section function is to describe the output and inputs, as well as the circuit pins. The architecture section of the logic design provided follows the code provided below. The dataflow of the architecture begins the through the lab 1_vhdl The function (logic design) is then implemented The function is: F = TrTy + Tr’ Ty Tg’ + TyTg The end of dataflow will then end as F Read More

CHECK THESE SAMPLES OF Traffic Light Controller Circuit

Traffic Light Project

The third type of traffic light controller is for Ambulance Safe Pass Traffic Lights to allow safe passage of ambulances in both North/ South and East/ West directions.... For this type of traffic light controller, a FAB intelligent micro controller unit is used to program the desired traffic light sequence that includes the ambulance safe pass sequence.... The traffic light controller is a sequential device that needs to be designed and programmed through multiple step procedures....
59 Pages (14750 words) Coursework

Electronics as a Branch of Electrical Engineering

Electronics is that branch of electrical engineering in which the circuit includes electronic devices, circuit's systems are only important because of the functions they provide and even then, the importance of a particular item depends on the relative cost, size, efficiency and reliability.... Electronic circuit's can only react to information in the form of time-varying voltages and currents.... Lets quickly look at the function of electronic circuit any systems....
11 Pages (2750 words) Essay

High-Speed Network Switching

In addition, voice communication employs a circuit switching method for network switching.... o circuit Switching is a network switching technique which entails the physical interlink of two systems.... Additionally, a high-quality instance of circuit switching comprises the Public Switching Telephone Network.... As voice is time-receptive or else time-reliant traffic, synchronized and interactive services were necessary for the voice communication....
15 Pages (3750 words) Research Proposal

Traffic Junction Alarm System

The report has detailed the traffic junction's alarm system components as well as the design of a digital circuit.... ur circuit was set up as shown in figure 1 below.... This circuit was connected via USB to a computer, on which we programmed the code using Pelles C to control when the warning lights were made to turn on.... The warning sound should go on when the green light for either user is required to use.... "traffic Junction Alarm System" paper investigates a traffic junction's alarm system that will reduce accidents by producing necessary sounds when a wrong move is made by a road user....
7 Pages (1750 words) Coursework

Bambui Transport

When considering the type of pavement to use, it will be borne in mind that asphalt is flexible pavement and will thus flow slowly under the pounding of traffic.... One of the places that should be improved in terms of the transport system in Bambui.... Presented in this paper 'Bambui Transport' is the need definition part of the project to improve the transport system in Bambui....
13 Pages (3250 words) Coursework

Moorabbin Airport Midair Collision between UPY and CGT Aircrafts on 27th August 2008

The UPY solo pilot was on touch-and-go landings circuit training as essential training for his solo flying career.... However, during his first touch-and-go landing circuit, he misaligned the downwind leg parallel tracks which led him to diverge 340 from 35 left runway to 31 left runway.... The cause of the aviation accident observed in the paper was mainly due to human factors including poor situational awareness of the solo pilot in the UPY aircraft, work overload of the air traffic controller, lack of situational awareness of student pilots bin either aircraft, poor visual acquisition, and poor separation of traffic flows at the aerodrome....
12 Pages (3000 words) Case Study

Solar Powered LED Street Light

The controller circuit will regulate the charging and discharging, and also control the intensity of the street lights as they will be kept high during the peak hours and low during off-peak hours.... The paper "Solar Powered LED Street light" describes that this project will focus on the design of a solar-powered LED street light system.... ntroductionThe solar-powered LED street lighting system utilizes solar radiation energy to charge a battery with the photovoltaic panel throughout the day and provide electrical energy to the LED light system during the night....
7 Pages (1750 words) Report

Solar Powered LED Street Light

This paper "Solar Powered LED Street light" presents a design project of solar-powered LED street lights with intelligent control.... The solar-powered LED street lighting system utilizes solar radiation energy to charge a battery with the photovoltaic panel throughout the day and provide electrical energy to the LED light system during the night.... The use of solar energy with LEDs rather than compact fluorescent light (CFL) bulbs provide a very effective solution....
23 Pages (5750 words) Report
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us